Halo 2: [TUT] Adding Rockets To Pelican in MP (Tutorial)

09-02-2007, 01:42 PM · Forum: Lounge - No Replies
Halo 2: [TUT] Adding Rockets To Pelican in MP

Game: Halo 2

Description

Adding Rockets To The Pelican In MP

found by Reepr

Assuming you want it in an MP map (you didn't specify), you need to spawn the pelican via a vehc tag just like a regular vehicle, and set the permutation in the vehc tag to 'attack'. And that's it for getting the rocket launchers to spawn on it.

If you want to actually use the rocket launchers - open its vehi tag (forgot the name - but it is seperate from the main pelican.vehi) and on the first seat, set it so you can use it by making sure un-disable the seat and put a warthog turret animation on it. And increase the seat distance. And that's all - you just go next to the wing, and it'll say to press X to use warthog turret, and when you do, you'll get into the turret on the wing and it'll shoot rapid-fire pelican rockets (which do as much damage as regular rockets exactly, but look cooler).

  Halo 2: How To Make a Modded disc With Ease Ready To Hotswwap (Tutorial)

08-27-2007, 08:17 PM · Forum: Lounge - No Replies
Halo 2: How To Make a Modded disc With Ease Ready To Hotswwap

Game: Halo 2

Description

ok omg this is amazing realy easy to do

all you have to do is ftp and put the halo 2 disc in when your in dash so it says game and then go the d folder and burn everything in there in that order to a blank dvd but replace the ma[s with modded map and then when you hot swap i promise you it will work did it before i am using a phillps drive if that makes a diffrence your welcome

  Halo 2: How to shoot directly behind you (Tutorial)

08-23-2007, 05:54 AM · Forum: Lounge - No Replies
Halo 2: How to shoot directly behind you

Game: Halo 2

Description

Note: I'd be surprised if no one has figured this out yet, but I haven't seen it in this or other forums. So here we go:

1. Open your map in Entity 1.6UE.
2. Select the [weap] tag, and then select the gun you want to edit.
3. In the meta editor, scroll down to the Triggers section.
4. Where it says "Distribution Function," click the dropdown and select "Fan."
5. Immediately below this box, change the "projectiles per shot" to 2, or whatever number you like. This MUST be an even number, or you will shoot in front of you like normal.
6. Immediately below that, change the "Distribution Angle" to 6.28.

Here's how it works: The Fan distribution function makes the projectiles from ONE shot fan out from each other, separated by the distribution angle. The distribution angle is in radians. If you play around with the fan distribution angle, you'll notice the game will automatically and somewhat randomly orient your spread horizontally or vertically. Fortunately, 6.28 in radians is all the way around the circle, so it's the same regardless of whether the game decides you're shooting horizontally or vertically.

Because it is very difficult to aim behind you, I'd recommend setting the projectiles per shot to 10 or 12, and changing the minimum and maximum error to something like that of the shotgun. Click Tools->Plugins->Standard XML Plugin to set these angles. That way you'll get a good spread and stand a reasonable chance of hitting someone behind you.

  Halo 2: How to add (new or more) items that do not require a respawn (Tutorial)

07-14-2007, 06:26 PM · Forum: Lounge - No Replies
Halo 2: How to add (new or more) items that do not require a respawn

Game: Halo 2

Description

Halo 2 beginners modding

THIS IS NOT FOR SYSTEM LINKING THIS IS FOR OCCASIONS WHEN EVERYONE CAN UPLOAD THE SAME MAP TO THEIR XBHDD

To place more or new non respawning items to a map (ALREADY ON THE MAP OR NOT) with entity 1.39 or above

Blocks already part of the map first,

go to scenario tag > open the chunk cloner > find the obstacle placement reflexive > clone the first chunk for the amount of blocks (actual number on the bsp/map) you wish to add > add meta to map > open the meta editor find the obstacle placement section (near the bottom) this will give you all obstacle placements co-ords (X,Y,Z, roll yaw and pitch) and bloc type (labeled palette chunk #) change the palette chunk # to your block of choice > save in the meta editor one by one > use the BSP to place > save in BSP and sign

Blocks not already on the map

open the map you wish to use the blocks of > open the bloc tag > check the parsed recursive and sounds boxes > left click the block you wish to export > click save (pick a folder)( keep doing that until you have collected all the blocks you want) Open the map you wish to import these blocks to > click build > direct entity to where you saved all the blocks earlier (entity saves them as .info files) > one by one build these new blocks (building blocks he he) into the map >open the scenario tag > open the chunk cloner > open the obstacle palette reflexive clone the first chunk once for every block imported (10 new types of blocks clone 10 times) add meta to map > display Idents > find your newly cloned chunks and one by one SWAP idents to your imported blocks you can now supply placements to these blocks as you would for blocks already part of the map

I don't know for sure but I think you can also do this for scenery as it has a palette reflexive and a placement reflexive also I think you can clone objective locations chunks too then meta edit those placements to make more odd balls, territories, hills etc

If you've learned something here give thanks or I'll send the boys round with magnets to mess up your harddrive

  Halo 2: PMI Tut (Tutorial)

06-11-2007, 02:57 PM · Forum: Lounge - No Replies
Halo 2: PMI Tut

Game: Halo 2

Description

HOW TO PMI AIs

1.Make a new folder on the desktop named project
2.Open the project folder and make 4 new folders
3.Build, Batch Extract, BSP, and New Items then go into New items & make Hunter
4.Take A FRESH(this is crucial) copy of the map your pming into
5.And place it into the build folder then open hmt 3.5
6.Open the map you just put in build and goto tools>extract>batch extract
7.check extract metadata and click extract and extract it to Batch Extract
8.When complete close the window.
9.Goto Tools>extract>BSP/Model sections and extract it to BSP
10.Open B30.map and goto the ACTR section and select hunter
11.check recursive and click save meta
12.save the meta in the project>new items>hunter folder
13.Now goto ACTV section and select hunter
14.check recursive and click save meta
15.save the meta in the project>new items>hunter folder again!
16.goto BIPD and select hunter
17.check recursive and click save meta
18.save the meta in the project>new items>hunter folder Again Again!
19.goto tools>generate raw model offsets list and save to desktop or whateva
20.goto tools>extract>raw model then open the CSV and select our offsets
21.Find Hunter and extract it to new items>Hunter>characters>Hunter
22.now close this window and goto tools>decrap raw models
23.Right click on the box and goto new items>hunter>characters>hunter add the raw model (hunter.mod2.meta)
24.in the existing vertex area box hit browse goto BSP and select whats there
25.in the existing index areabox hit browse goto BSP and select whats there again
26.do the same for the last box then hit decrap And Build A New BSP chunk
27.Go into your project folder goto BSP find Bloodgulch.sbsp.meta and copy it
28.then goto Batch Extract folder then levels>test>bloodgulch and past it there
29.place all the contents of the Hunters folder and all of the batch folder into build
30.goto rebuild map for original map goto build and select bloodgulch.map and select yes to auto fill in then goto Add and find build>characters>hunter and add all the files in the main folder and sub-folders
31.Hit Build when the window pops up for new vertex area hit yes and browse to BSP and select Bloodgulch.verticies.new
32.it will ask you if theres a new index area hit yes and browse to BSP again and select Bloodgulch.indicies.new
33.Hit yes to use modified start offset and BAM! your done

Source:PMI Tut - ModHalo: Halo Maps, Mods, and More!

  Halo 2: how to apply patches(ppf and sppf) ez way (PiCs*) (Tutorial)

04-02-2007, 10:21 PM · Forum: Lounge - No Replies
Halo 2: how to apply patches(ppf and sppf) ez way (PiCs*)

Game: Halo 2

Description

you will need:
clean maps (get them here) Index of /Download/Modding/Original_Maps
Flash FXP or any FXP program
ppf-o-matic or super ppf

1)1st download the mod you want save it someplace u will remember
2)open 1 of the ppf programs (im using super ppf) super ppf looks like this

3)click the floppy picture next to map file and find the clean map u found earlier click open

4)next click the patch file and find the ppf file u saved click open
make sure that the ppf file goes with the same map as the clean map
5)click apply super ppf patch

6)a screen should come up that says "done"

  Halo 2: how to apply patches(ppf and sppf) ez way (PiCs*) (Tutorial)

04-02-2007, 10:19 PM · Forum: Lounge - No Replies
Halo 2: how to apply patches(ppf and sppf) ez way (PiCs*)

Game: Halo 2

Description

you will need:
clean maps (get them here) Index of /Download/Modding/Original_Maps
Flash FXP or any FXP program
ppf-o-matic or super ppf

1)1st download the mod you want save it someplace u will remember
2)open 1 of the ppf programs (im using super ppf) super ppf looks like this

3)click the floppy picture next to map file and find the clean map u found earlier click open

4)next click the patch file and find the ppf file u saved click open
make sure that the ppf file goes with the same map as the clean map
5)click apply super ppf patch

6)a screen should come up that says "done"