01-20-2014, 09:15 AM
[TuT] How to make a fan switch between Auto & 12v
System: Xbox 360
Description
This is a TuT on How to make a fan switch so you can change from auto to 12v & 12v to auto
You will need:
1,
Solder a wire to this 12v point (Pad 4)
2,
Now take you fans and cut the Red & Brown wires about half way up!
sorry no pic!
3,
Solder a wire on to Red & Brown on the PLUG side!
4,
Solder a wire on to Red & Brown wires on the FAN side!
4,
Wire up the switch as the picture below shows
EnJoy
I'm not responsible if you break you console in anyway!
System: Xbox 360
Description
This is a TuT on How to make a fan switch so you can change from auto to 12v & 12v to auto
You will need:
- Soldering iron & solder
- 3-way switch
- Wire
- Opened xbox 360
1,
Solder a wire to this 12v point (Pad 4)
2,
Now take you fans and cut the Red & Brown wires about half way up!
sorry no pic!
3,
Solder a wire on to Red & Brown on the PLUG side!
4,
Solder a wire on to Red & Brown wires on the FAN side!
4,
Wire up the switch as the picture below shows
EnJoy
I'm not responsible if you break you console in anyway!

