Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(Xbox 360) My typed up tutorial on how to update your dash and more (Tutorial)
1
My typed up tutorial on how to update your dash and more

System: Xbox 360

Description

How to update your dashboard to 2.0.16537.0
Step 1: Download the new Xebuild GUI Version 2.091
Step 2: Download Flash 360 for your rgh / jtag
Step 3: Turn rgh / jtag on and go to xex menu 1.1
Step 4: Then put flash 360 some were anywhere really
Step 5: Launch flash360.xex
Step 6: Press x to backup nand
Step 7: Press a to save entire nand to file
Step 8: It will start saving your nand wait tell its complete
Step 9: Once this is done press any button to continue on
Step 10: Then press back button to return to main menu
Step 11: Then press back button to exit application
Step 12: Then go back to xex menu and go find Flash360 folder then copy the flashdmp.bin
Step 13: Then go and paste that to your usb flash drive
Step 14: Go back to your pc or laptop and plug in your usb flash drive
Step 15: Open usb flash drive and copy and paste the flashdmp.bin file to your desktop
Step 16: Then open xebuild
Step 17: click open on source file and click on your flashdmp.bin file
Step 18: you need your cpukey if you do not have it already hold down eject button in tell xell loads on your rgh / jtag and it wil give it to you make sure you copy it right or it can mess up your rgh / jtag
Step 19: Once you have put your cpukey in then pick the 2.0.16537.0 kernel version and then hit Generate Hacked Image
Step 20: Once that is done copy your new updflash.bin and paste it to your usb and go start up your rgh or jtag and laucn xex menu
Step 21: Once you have done that copy and pase the updflash.bin file into your flash360 folder if you dont it wont work
Step 22: Then you launch Flash360.xex
Step 23: Then click A
Step 24: Then click a again
Step 25: Then click start button
Step 26: Then click a
Step 27: it will start updating once done click any button
Step 28: Click back button
Step 29: read step 30 before doing this step Click back button to shutdown
Step 30: Once it shuts down unplug everything usbs internet cable hard drive hdmi av everything so nothing is connected
Step 31: wait about 1 - 2 mins and then plug in everything make sure you plugin powersuply last and then it should load up your new dashboard

How to setup your jtag to go onlineStep 1: You need dash launch 3.10
Step 2: You need XBLStealth.xex plugin its $20.00 aday
Step 3: You need con patch disabled
Step 4: You need Ping patch disabled
Step 5: You need Live block disabled
Step 6: You need Live strong disabled
Step 7: You need plugin number 1 to have XBLStealth.xex
Step 8: You need to go and save and load on HDD the launch.ini file
Step 9: Make sure you have link disabled
Step 10: Restart your rgh / jtag and you should get a message saying XBLSE Platinum - Fully Stealthed!

How to disable your jtag from going online when your time is up
Step 1: Turn on rgh / jtag then hold down the eject button tell you load into the dashboard
Step 2: Go to dashlaunch and hover over plugin number 1 and press y it will delete the plugin
Step 3: Go to the fallowing and re enable them Live strong live block and ping patch and con patch
Step 4: Go and save launch.ini then load launch.ini and then restart jtag / rgh and your rgh / jtag shall no longer freeze at boot up
I hope this tutorial helps out some people and post your comments below if you want other tutorials

If you want to download this tutorial to keep in case this gets closed down
Download link: http://www.mediafire.com/download/4m9jl2...torial.zip

Virus Scan:https://www.virustotal.com/en/file/...65cb1613ba51d3fb6aeaee40/analysis/1385353822/

-TuT by Ghostly1373

Sorry but not providing download links with .xex files
Reply

Users browsing this thread:
1 Guest(s)

Messages In This Thread
(Xbox 360) My typed up tutorial on how to update your dash and more (Tutorial) - by xSicKxBot - 12-25-2013, 01:44 AM


Forum Jump: