12-10-2013, 11:34 AM
[TUT]How to put white HDD into Newer Slim
System: Xbox 360
Description
This is how to get the HDD from the white xbox(The big bulky one) into the slim without having to buy that 100 dollar 250 GB or $130 320 GB HDD(only ones that "work" on slim).
What you need:
Safe Way
Use T10 and T6 to unscrew casing to get drive once done refer back to instruction 5,6,7 And there you go you just ButtF**ked Microsoft for changing it.
Key-HDD=Hard Disk Drive
System: Xbox 360
Description
This is how to get the HDD from the white xbox(The big bulky one) into the slim without having to buy that 100 dollar 250 GB or $130 320 GB HDD(only ones that "work" on slim).
What you need:
- White bulky old HDD of any size memory
- Maybe some pliers(Unsafe but pressed for time/cash)
- A T10 and T9 Torq Screwdriver(For safe way)
- Now for instructions:
Effective but not as Safe [*
1.Once you have HDD break that $hit open (carefully)
[*]2.You are gonna use the pliers to get into some open places an wedge pieces off
[*]3.Now once you have the back of you should see a metal casing, that is the piece that protects the HDD
[*]4.Now with your T10 Screwdriver unscrew the metal piece
[*]5.Now you just now need to unplug the HDD from the casing
[*]6.Now take it over to slim and put it in the HDD slot(IT MAY TAKE A FEW TIMES TO GET IN RIGHT
[*]7.Now it is going to be a little loose so just make sure your Xbox does not move like crazy
Safe Way
Use T10 and T6 to unscrew casing to get drive once done refer back to instruction 5,6,7 And there you go you just ButtF**ked Microsoft for changing it.
Key-HDD=Hard Disk Drive

