Yesterday, 12:53 AM
Repeating mini crossbow
Not my design. Originally created by DIYPark.
![[Image: attachment.php?aid=2292]](https://sickgaming.net/attachment.php?aid=2292)
![[Image: attachment.php?aid=2293]](https://sickgaming.net/attachment.php?aid=2293)
Thing Details
Things download - https://cults3d.com/en/3d-model/game/rep...i-crossbow
How to make - https://youtu.be/N4zxyb1klb0
- Some people complained that the hole was small. So I modified the hole size of some parts from 1.98mm to 2.2mm. The old one was compressed separately.
- This model is optimized for 0.4mm nozzle.
- It would be cumbersome, but please print out the parts one by one.
- You must wear safety goggles for safety.
- The total print time depends on the slicer program setting, but it usually takes 2 to 3 hours.
- The consumption of filament is about 8m. PLA, and ABS filaments may be used.
Download:
Not my design. Originally created by DIYPark.
Thing Details
Things download - https://cults3d.com/en/3d-model/game/rep...i-crossbow
How to make - https://youtu.be/N4zxyb1klb0
- Some people complained that the hole was small. So I modified the hole size of some parts from 1.98mm to 2.2mm. The old one was compressed separately.
- This model is optimized for 0.4mm nozzle.
- It would be cumbersome, but please print out the parts one by one.
- You must wear safety goggles for safety.
- The total print time depends on the slicer program setting, but it usually takes 2 to 3 hours.
- The consumption of filament is about 8m. PLA, and ABS filaments may be used.
Download:

