Blazor WebAssembly 3.2.0 Preview 5 release now available

Blazor WebAssembly 3.2.0 Preview 5 release now available - Printable Version

+- Sick Gaming (https://sickgaming.net)
+-- Forum: Programming (https://sickgaming.net/forum-76.html)
+--- Forum: C#, Visual Basic & .NET (https://sickgaming.net/forum-79.html)
+--- Thread: Blazor WebAssembly 3.2.0 Preview 5 release now available (/thread-95409.html)

Blazor WebAssembly 3.2.0 Preview 5 release now available - xSicKxBot - 06-03-2020

Blazor WebAssembly 3.2.0 Preview 5 release now available

Daniel

April 23rd, 2020

A new preview update of Blazor WebAssembly is now available! Here’s what’s new in this release:

Read configuration during startup
Configure HTTP fetch request options
Honor existing web.config when publishing
Attach tokens to outgoing requests
Support for time zones

Get started

To get started with Blazor WebAssembly 3.2.0 Preview 5 install the latest .NET Core 3.1 SDK.

Quote:NOTE: Version 3.1.201 or later of the .NET Core SDK is required to use this Blazor WebAssembly release! Make sure you have the correct .NET Core SDK version by running
Code:
dotnet --version
from a command prompt.

Once you have the appropriate .NET Core SDK installed, run the following command to install the updated Blazor WebAssembly template:

Code:
dotnet new -i Microsoft.AspNetCore.Components.WebAssembly.Templates::3.2.0-preview5.20216.8

If you’re on Windows using Visual Studio, we recommend installing the latest preview of Visual Studio 2019 16.6. For this preview, you should still install the template from the command-line as described above to ensure that the Blazor WebAssembly template shows up correctly in Visual Studio and on the command-line.

That’s it! You can find additional docs and samples on https://blazor.net.

Upgrade an existing project

To upgrade an existing Blazor WebAssembly app from 3.2.0 Preview 4 to 3.2.0 Preview 5:

Update all Microsoft.AspNetCore.Components.WebAssembly.* package references to version 3.2.0-preview5.20216.8.
Update any Microsoft.AspNetCore.Components.WebAssembly.Runtime package references to version 3.2.0-preview5.20216.1.
Remove any calls to set
Code:
WebAssemblyHttpMessageHandlerOptions.DefaultCredentials
and instead call
Code:
SetBrowserRequestCredentials
on individual requests (see “Configure HTTP fetch request options” section below).
Remove the
Code:
redirect
parameter from calls to
Code:
TryGetToken
on
Code:
AccessTokenResult
.

You’re all set!

Read configuration during startup

Configuration data is now available during app startup in

Code:
Program.Main

using the

Code:
Configuration

property on

Code:
WebAssemblyHostBuilder

. This property can now be used both to add configuration sources and to access the current configuration data.

You can see this feature in action in the project templates when you enable authentication with Azure AD, Azure AD B2C, or an OpenID Connect provider of your choice. The authentication settings are stored in appsettings.json and then read from configuration when the app starts up:

Program.cs

Code:
public class Program
{ public static async Task Main(string[] args) { var builder = WebAssemblyHostBuilder.CreateDefault(args); builder.RootComponents.Add<App>("app"); builder.Services.AddTransient(sp => new HttpClient { BaseAddress = new Uri(builder.HostEnvironment.BaseAddress) }); builder.Services.AddOidcAuthentication(options => { // Configure your authentication provider options here. // For more information, see https://aka.ms/blazor-standalone-auth builder.Configuration.Bind("Local", options.ProviderOptions); }); await builder.Build().RunAsync(); }
}

appsettings.json

Code:
{ "Local": { "Authority": "https:login.microsoftonline.com/", "ClientId": "33333333-3333-3333-33333333333333333" }
}

Configure HTTP fetch request options

HTTP requests issued from a Blazor WebAssembly app using

Code:
HttpClient

are handled using the browser

Code:
fetch

API. In this release, we’ve added a set of extension methods for

Code:
HttpRequestMessage

that configure various

Code:
fetch

related options. These extension methods live in the

Code:
Microsoft.AspNetCore.Components.WebAssembly.Http

namespace:

Code:
HttpRequestMessage

extension method |
Fetch request property

Code:
SetBrowserRequestCredentials

|
credentials

Code:
SetBrowserRequestCache

|
cache

Code:
SetBrowserRequestMode

|
mode

Code:
SetBrowserRequestIntegrity

|
integrity

You can set additional options using the more generic

Code:
SetBrowserRequestOption

extension method.

The HTTP response is typically buffered in a Blazor WebAssembly app to enable support for sync reads on the response content. To enable support for response streaming, use the

Code:
SetBrowserResponseStreamingEnabled

extension method on the request.

Honor existing web.config when publishing

When publishing a standalone Blazor WebAssembly app, a web.config is automatically generated for the app that handles configuring IIS appropriately. You can now specify your own web.config in the project, which will get used instead of the generated one.

Attach tokens to outgoing requests

Configuring authentication now adds an

Code:
AuthorizationMessageHandler

as a service that can be used with

Code:
HttpClient

to attach access tokens to outgoing requests. Tokens are acquired using the existing

Code:
IAccessTokenProvider

service. If a token cannot be acquired, an

Code:
AccessTokenNotAvailableException

is thrown. This exception has a

Code:
Redirect

method that can be used to navigate the user to the identity provider to acquire a new token. The

Code:
AuthorizationMessageHandler

can be configured with the authorized URLs, scopes, and return URL using the

Code:
ConfigureHandler

method.

For example, you can configure an

Code:
HttpClient

to use the

Code:
AuthorizationMessageHandler

like this:

Code:
builder.Services.AddSingleton(sp =>
{ return new HttpClient(sp.GetRequiredService<AuthorizationMessageHandler>() .ConfigureHandler( new [] { "https://www.example.com/base" }, scopes: new[] {"example.read", "example.write"})) { BaseAddress = new Uri("https://www.example.com/base") };
});

For convenience, a

Code:
BaseAddressAuthorizationMessageHandler

is also included that is preconfigured with the app base address as an authorized URL. The authentication enabled Blazor WebAssembly templates now use IHttpClientFactory to set up an

Code:
HttpClient

with the

Code:
BaseAddressAuthorizationMessageHandler

Code:
builder.Services.AddHttpClient("BlazorWithIdentityApp1.ServerAPI", client => client.BaseAddress = new Uri(builder.HostEnvironment.BaseAddress)) .AddHttpMessageHandler<BaseAddressAuthorizationMessageHandler>(); // Supply HttpClient instances that include access tokens when making requests to the server project
builder.Services.AddTransient(sp => sp.GetRequiredService<IHttpClientFactory>().CreateClient("BlazorWithIdentityApp1.ServerAPI"));

You can use the configured

Code:
HttpClient

to make authorized requests using a simple try-catch pattern. For example, here’s the updated code in the

Code:
FetchData

component for requesting the weather forecast data:

Code:
protected override async Task OnInitializedAsync()
{ try { forecasts = await Http.GetFromJsonAsync<WeatherForecast[]>("WeatherForecast"); } catch (AccessTokenNotAvailableException exception) { exception.Redirect(); }
}

Alternatively, you can simplify things even further by defining a strongly-typed client that handles all of the HTTP and token acquisition concerns within a single class:

WeatherClient.cs

Code:
public class WeatherClient
{ private readonly HttpClient httpClient; public WeatherClient(HttpClient httpClient) { this.httpClient = httpClient; } public async Task<IEnumerable<WeatherForecast>> GetWeatherForeacasts() { IEnumerable<WeatherForecast> forecasts = new WeatherForecast[0]; try { forecasts = await httpClient.GetFromJsonAsync<WeatherForecast[]>("WeatherForecast"); } catch (AccessTokenNotAvailableException exception) { exception.Redirect(); } return forecasts; }
}

Program.cs

Code:
builder.Services.AddHttpClient<WeatherClient>(client => client.BaseAddress = new Uri(builder.HostEnvironment.BaseAddress)) .AddHttpMessageHandler<BaseAddressAuthorizationMessageHandler>();

FetchData.razor

Code:
protected override async Task OnInitializedAsync()
{ forecasts = await WeatherClient.GetWeatherForeacasts();
}

Support for time zones

Blazor now infers the user’s time zone and uses it in date and time calculations. In addition, APIs on

Code:
System.TimeZoneInfo

that previously returned incomplete results now report correct results.

Help improve the Blazor docs!

Thank you everyone who has taken the time to give feedback on how we can best improve the Blazor docs!

If you haven’t already, please join in with helping us improve the docs by doing the following:

As you read the Blazor docs, let us know where we should focus our efforts by telling us if you find a topic helpful or not using the helpfulness widget at the top of each doc page:
Use the Feedback section at the bottom of each doc page to let us know when a particular topic is unclear, inaccurate, or incomplete.
Comment on our Improve the Blazor docs GitHub issue with your suggestions for new content and ways to improve the existing content.

Feedback

We hope you enjoy the new features in this preview release of Blazor WebAssembly! Please let us know what you think by filing issues on GitHub.

Thanks for trying out Blazor!